mspa Line - User Manual

103 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

Owner’s Manual

P-SH069

Line

Questions and Answers

K
Kevin LaneAug 20, 2025
Why is my mspa Line Hot Tub not heating properly?
- G
  guzmanandreAug 20, 2025
  Your MSpa hot tub might not be heating properly due to several reasons: * The set temperature could be too low, in which case you should set a higher temperature. * A dirty filter cartridge can prevent proper heating. Clean or replace the filter cartridge. * If the water level is below the minimum line, add more water. If these steps don't resolve the issue, it may be due to a heater or filter pump failure, requiring professional assistance.
A
Anthony HendersonAug 22, 2025
What to do if there is no display on the wired controller of my mspa Line Hot Tub?
- D
  David WilliamsAug 22, 2025
  If there's no display on your MSpa hot tub's wired controller, consider the following: * Check the power supply to ensure it's working. * Reset the PRCD (Portable Residual Current Device) by following the PRCD Testing section to resolve a potential trip. If the issue persists, the PRCD might be broken, or there could be an internal problem with the control panel, which would require contacting the MSpa Service Center.
M
mark89Aug 25, 2025
Why doesn't the bubble air blower work on my mspa Line?
- C
  Charles MerrittAug 25, 2025
  The bubble air blower on your MSpa hot tub might not be working for these reasons: * It may have automatically turned off after 10 minutes; wait for 10 minutes before restarting. * If the inflation knob is in the position, turn it to and then try turning on the bubble button again. If the issue persists, there might be a problem with the unidirectional threshold or control panel, requiring assistance from the MSpa Service Center.
K
Kenneth MuellerAug 26, 2025
Why is my mspa Line Hot Tub losing air pressure?
- S
  Shannon WernerAug 27, 2025
  If your mspa Hot Tub is losing air pressure, first check if the air valve is loose. Inflate the spa until the yellow section of the manometer is pushed out, and ensure the valve is screwed tightly, replacing it if necessary. Also, inspect the spa tub for holes or splits by applying soap water to the seams; repair any leaks found with the provided repair patch.
J
Jordan SmithAug 28, 2025
What does E1 error mean on mspa Line?
- W
  wardmichaelAug 28, 2025
  The E1 error on your mspa Hot Tub can be caused by a waterflow switch failure or if the water level is not at the minimum line. Add water above the minimum line.
W
whitescottAug 29, 2025
What to do if my mspa Line is leaking?
- T
  Timothy HernandezAug 29, 2025
  If your mspa Hot Tub is leaking, start by checking if the spa inlet/outlet connections are securely tightened. Also, ensure the drainage valve is completely closed. If water is leaking from the spa pool body, repair the hole with the provided repair kit material.
R
Rachel SmithAug 31, 2025
What to do if the filter pump does not work on my mspa Hot Tub?
- R
  Rhonda OconnorAug 31, 2025
  If the filter pump of your mspa Hot Tub isn't working, the filter might be stuck due to dirt or other objects. Try cleaning or replacing the filter cartridge.
G
Gregory HubbardSep 2, 2025
Why is there no display on my mspa Line Hot Tub wired controller?
- W
  williamharrisSep 2, 2025
  If there is no display on the wired controller of your mspa Hot Tub, check the power supply first. If that's not the issue, reset the PRCD.
F
Faith CurtisSep 4, 2025
Why is my mspa Line Hot Tub in an abnormal shape?
- T
  Timothy CarlsonSep 4, 2025
  If your mspa Hot Tub is in an abnormal shape, it might be due to extra air pressure from strong sunlight. Check the air pressure and release some air if needed, especially during hot weather, to avoid any damage.
X
xmontoyaSep 6, 2025
What does E0 error mean on mspa Line Hot Tub?
- C
  Chris SimsSep 6, 2025
  The E0 error on your mspa Hot Tub indicates that the water temperature is either below 0°C or exceeds 55°C. Change the water.

mspa Line Specifications

General

Brand	mspa
Model	Line
Category	Hot Tub
Language	English

Related product manuals

mspa Lite LR04-NA

mspa Lite LS04-GR

mspa Lite LR04-GR

mspa Lite LS06-GR

mspa Lite LR06-GR

Preview: mspa Lite LS04-NA

mspa Lite LS04-NA

mspa Lite LR042-GR

Preview: mspa Lite LS04U-NA

mspa Lite LS04U-NA

Preview: mspa Tekapo

Preview: mspa TUSCANY