Why is my MSpa Bathtub not heating properly?
Your MSpa Bathtub might not be heating properly due to several reasons. The water level might be below the minimum line, so add more water. The temperature setting could be too low, so increase it. Alternatively, the filter cartridge might be dirty, requiring cleaning or replacement.
How to fix no display on the wired controller of MSpa Bathtubs?
If there is no display on the wired controller of your MSpa Bathtub, first, check the power supply. If that's not the issue, reset the GFCI. If the GFCI continues to trip, there may be an issue.
What to do if my MSpa Bathtub is leaking?
If your MSpa Bathtub is leaking, first check the spa inlet/outlet connections and tighten them if they are loose. Also, ensure the drainage valve is completely closed. If the leak persists and appears to be coming from the spa pool body, use the repair kit material to patch the hole.
Why is my MSpa Bathtub losing air pressure?
If your MSpa Bathtub is losing air pressure, the air valve may be loose. Inflate the spa until the yellow section of the manometer is pushed out and ensure the valve is tightly screwed. If necessary, replace the valve. Additionally, inspect the spa tub for holes or splits. Apply soapy water to seams; bubbles indicate a leak. Clean and dry the area before applying the repair patch.
To Next Page
General
