Data subject to change without notice 2 of 32 INSTR-011 REL. 150109 REV. 006
See www.mtecorp.com for current data and CAD drawings
Important User Information
NOTICE
MTE Series RL Line/Load Reactors are components designed to improve the reliability of
adjustable frequency drives, DC drives and a wide variety of other types of power
electronic equipment. In addition, they provide limited input line current harmonic
mitigation and aid in long lead protection for inverter fed motors. Note: (See MTE
harmonic filters and motor protection products for guaranteed results.) MTE reactors are
available in a large number of current ratings and a variety of inductance values. The
suitability of a line/load reactor for a specific application must therefore be ultimately
determined by the customer. In no event will MTE Corporation assume responsibility or
liability for any direct or consequential damages resulting from the use or application of
reactors. Nor will MTE Corporation assume patent liability with respect to the use of
information, circuits or equipment described in this instruction manual.
This manual includes recently redesigned performance enhanced reactors. These reactors are
physically smaller and weigh less than the reactors they replace. Enhanced reactors have base
mounting brackets with additional slotted holes to accommodate past mounting hole centers. You
may use your existing drill pattern or choose the new layout. The tables contained in this manual
reflect historical mounting dimensions for previous reactors.
This document supports computer searches and is best viewed with Adobe Acrobat™
PDF viewer (6 or 7). Click links are incorporated throughout the document to speedup
document navigation.
To Next Page
Loading...
