AC Line / Load Reactors
User Manual
Data subject to change without notice 31 of 32 INSTR-011 REL. 150109 REV.006
See www.mtecorp.com for current data and CAD drawings
STARTUP
Safety Precautions
Before startup, observe the following warnings and instructions:
WARNING
A Reactor is at line potential when the Reactor is connected to the utility. This voltage
is extremely dangerous and may cause death or severe injury if you come in contact
with it.
WARNING
High voltage is used in the operation of line/load reactors. Use Extreme caution to
avoid contact with high voltage when operating, installing or repairing equipment
containing line/load reactors. Line/load reactors are used in conjunction with
inverters, or other electrical equipment that may feedback lethal voltages.
Follow the safety instructions in the equipment used with the reactor in addition
to the safety instruction in this manual.
INJURY OR DEATH MAY RESULT IF SAFETY PRECAUTIONS ARE
NOT OBSERVED.
To Next Page
Loading...