MTF DM2 2500i - Page 81

81
Rain mode
Rain mode sets if the mower will go out in rain or not. Disabling this will allow the mower to continue to
work in the rain.
WARNING avoid activation during heavy rain and storms. Wet grass will cause additional load for the mower
and mowing time may be reduced. In some cases the mower may not return to the charge base in rain.
1. Press OK button to enter sub-menu 1.
2. Select „setting“ to enter sub-menu 2.
3. Select „rain mode“.
4. Press UP and DOWN buttons to enable the rain mode.
5. Press OK button to confirm setting.
Language
Date and time
1. Press OK button to enter sub-menu 1.
2. Select „setting“ to enter sub-menu 2.
3. Select „Language“.
4. Press UP and DOWN buttons to select the
desired language.
5. Press OK button to confirm setting.
1. Press OK button to enter sub-menu 1.
2. Select „setting“ to enter sub-menu 2.
3. Select „date & time“.
4. Press UP, DOWN, LEFT and RIGHT buttons to set
the date and time.
5. Press OK button to confirm setting.
Setting date and time accurately ensures
scheduling is accurate.