Page 8 MTI Part Number 7001-0040
Revision 3.1 August 7, 2014
SETUP Tab
The SETUP tab displays information
concerning the internal software version
number, unit serial number, and the
calibration date of your 1500 Series unit.
When the 1500 Series Precision Signal
Source Software Package is first run, the
data windows on this display will be blank
as illustrated:
To refresh the data displayed in the
windows, use the CONFIGURATION drop-
down menu, and select the Upload From
Unit option as illustrated.
After acknowledging the Upload success
message, the display will be updated with
the current 1500CS internal settings.
Although the serial number and
software version numbers cannot be
changed, it is useful information when
talking to your MTI Instruments support
representative.
The “Last Calibration Date” information
may be changed by the user of the
calibrator.
To Next Page
Loading...