Page 22 MTI Part Number 7001-0040
Revision 3.1 August 7, 2014
TOOLS Menu
The TOOLS
menu provides
utilities for
remotely
operating the
1500CS or
1510A.
REMOTE CONTROL
PANEL – This selection
permits complete control of
the outputs of the 1500CS
or 1510A from the
computer. Users may
select any controllable
parameter of the 1500
from the user interface,
and when the set-up has
been completed, a click of
the DOWNLOAD to 1500
button will command the
1500 to generate the
selected signal(s).
CALIBRATION WIZARD – This
selection begins a fully sequenced set
of measurements to re-calibrate the
1500CS or 1510A unit. The
procedure results in the creation of a
calibration factors table which is
downloaded in to the unit.
To Next Page
Loading...