Dolito Bedienungsanleitung / Operators Manual
34
Preset Programs (01 - 05)
Total Running
Time
Frequency
Mode
Program
Pulse Width
Preparations:
Make sure that Dolito is switched o. Cleanse the area of the skin which is to be treated with
clean water. Following that, make sure that all plugs are completely connected to the respective
electrode sockets as well as device sockets. Place the vaginal-/rectal-probe or the adhesive
electrodes onto the area that has been cleansed, according to the advices in pages 25-27 of this
manual.
Dolito is operated by a 9 volt block battery. Open the battery compartment at the back by
pushing down the lid and insert the battery by hand. Please ensure the correct polarity in
accordance with the markings. Dolito is operational now.
If the battery voltage is too low, the battery-symbol in the LCD-display will ash. Please replace
the battery at this time. Empty batteries are special waste and therefore have to be disposed
o at an appropriate collection point or recycled. Never dispose of batteries via domestic or
household waste.
Adjustment:
1. Press the button „On/O” once.
Dolito is now switched on. The program used last, appears on the LCD-
display. Program parameters will be displayed as well as the treatment mode and the total
treatment time.
Low Battery
Indicator
To Next Page
Loading...
