Reprocessing (CPAP)
5. Cleaning the outer surface of the Dolphin CPAP
To clean the display panel or outer surface of the Dolphin CPAP housing, use a clean
cloth moistened with a mild detergent solution to gently wipe the target surfaces.
Do not allow liquids to enter the interior of the instrument.
device and cause damage to internal components.
Do not touch, press, or rub the display with abrasive cleaning compounds,
instruments, brushes, rough-surface materials, or bring them into contact
with anything that could scratch the display’s surface.
Do not use alcohol, petroleum-based or acetone solutions, or other harsh
solvents, to clean the device. These substances attack the device’s materials
and device failure can result.
Alcohol (preferably Ethanol) to gently wipe the temperature tips and the wire.
To Next Page
Loading...