Specications
Measurement Range
2
)
1
Pulse Rate
Perfusion Index
Response Time
Accuracy – Arterial Oxygen Saturation
Saturation
No Motion
2
Motion
3
Low Perfusion
4
Accuracy – Pulse Rate
5
Pulse Rate
No Motion
Motion
Low Perfusion
25 bpm to 240 bpm
25 – 240 (bpm)
± 3 bpm
± 5 bpm
± 3 bpm
Infants, Pediatrics
Neonates
Infants, Pediatrics, Neonates
Infants, Pediatrics, Neonates
Infants, Pediatrics, Neonates
Infants, Pediatrics, Neonates
Infants, Pediatrics, Neonates
1. SpO
2
2
against a laboratory CO-Oximeter. SpO
2
accuracy was
determined on 16 neonatal NICU patients ranging in age from 7 to 135 days old and weighting between 0.5 and 4.25 kgs. Seventy-nine (79) data sam-
2
2
-
tions.
2. Masimo SET technology with LNOP Adt sensors has been validated for motion accuracy in human blood studies on healthy adult male and female
volunteers with light to dark skin pigmentation in induced hypoxia studies while performing rubbing and tapping motions, at 2 to 4 Hz at an am-
SpO
2
population. The saturation accuracy of the neonatal sensors were validated on adult male and female volunteers with light to dark skin pigmentation
3. Masimo sensors have been validated for motion accuracy in human blood studies on healthy adult male and female volunteers with light to
dark skin pigmentation in induced hypoxia studies while performing rubbing and tapping motions, at 2 to 4 Hz at an amplitude of 1 to 2 cm and a
2
against a laboratory
of the population.
4. Masimo SET technology has been validated for low perfusion accuracy in bench top testing against a Biotek Index 2 simulator and Masimo’s simu-
5. Masimo sensors have been validated for pulse rate accuracy for the range of 25-240 bpm in bench top testing against a Biotek Index 2 simulator.
Operating
Transport and storage
Atmospheric pressure: 70-106kPa
Atmospheric pressure: 70-106kPa
Dimensions (HxWxD)
Total unit mass
Alarms
Display
Ingress Protection
Air compressor
Unit base
80 cm x 38 cm x 38 cm
18.0 kg
5 pulse burst, followed by 0.5 second delay, followed
by 5 pulse burst, followed by 3 second delay
330 Hz continuous tone
2 pulse burst, followed by 20 second delay
>50 dBA at a distance of 1 meter
LED
1 second
This device is protected against harmful effects of
dripping water per IEC 60529.
Integrated
4 caster wheels, 360
o
swivel with locks
overall
High Priority Audible Alarm
High Priority Audible Alarm (Power out)
Low Priority Audible Alarm
High Priority Visual Alarm
Alarm Volume
Type
Display Update Rate
IPX1
Internal
Mobile
AC Power requirements
Power consumption
100-240V, 50-60 Hz
240 W maximum
To Next Page
Loading...