EasyManua.ls Logo

MTU 16V2000M72 - Fuel Filter

MTU 16V2000M72
185 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8.9 Fuel Filter
8.9.1 Fuel filter – Replacement
Special tools, Material, Spare parts
Designation / Use Part No. Qty.
Oil filter wrench
F30379104 1
Diesel fuel
Easy-change filter
(→ Spare Parts Catalog)
DANGER
Components are moving or rotating.
Risk of crushing, danger of parts of the body being caught or pulled in!
Operate the engine at low load only. Keep clear of the danger zone of the engine.
WARNING
Fuels are combustible and explosive.
Risk of fire and explosion!
Avoid open flames, electrical sparks and ignition sources.
Do not smoke.
Wear protective clothing, protective gloves, and safety glasses / facial protection.
WARNING
High level of engine noise when the engine is running.
Risk of damage to hearing!
Wear ear protectors.
NOTICE
Damage to component!
Severe material damage!
For filter replacement with the engine running, operate the engine at low engine load.
The filter which is to be replaced must be cut out for a brief period only.
Easy-change fuel filter replace-
ment with the engine stopped
1. Stop engine and disable engine start.
2. Cut out the filter to be replaced.
A Both filters are cut in (standard posi-
tion)
B Left filter is cut out
C Right filter is cut out
3. Unscrew switched off easy-change filter with
oil filter wrench.
4. Clean sealing surface on filter head.
5. Check seal on new easy-change filter and
moisten with fuel.
6. Fit SOLAS shield (→ Page 91).
7. Install and tighten easy-change filter by hand.
8. Set three-way cock to operating position (A)
so that both filters are cut in (operating posi-
tion).
9. Replace further fuel filters in the same way.
10. Vent fuel system (→ Page 115).
116 | Fuel Filter | M015650/06E 2018-05
TIM-ID: 0000004914 - 007

Table of Contents

Related product manuals