16. Tighten nut (3) to specified torque using a torque wrench.
Name Size Type Lubricant Value/Standard
Nut M16 Tightening torque (Engine oil) 30 Nm +3 Nm
17. Fit seal (10).
18. Install cover.
19. Install screws (1), washers (2) and nuts (9).
20. Tighten nuts (9).
21. Open ball valve at the inlet and outlet of the fuel treatment system.
Result: The fuel treatment system is ready for operation.
M015650/06E 2018-05 | Fuel Supply System | 159
TIM-ID: 0000007735 - 013
To Next Page
Loading...
