701333-004 5-23
Configuring the 1330 in ASCII Mode
To specify your choice, follow the configuration procedure that begins on Page 5-1.
Enter your choice and press the Save key.
504 – Baud Rate
Configuration Option 504 selects the printer baud rate. The printer baud rate must match
that of the host.
noitpO eciohC gninaeM
405
1)ylno224-SR(K65
2)ylno224-SR(K4.83
3K2.91
4)tluafed(0069
50084
60042
70021
8006
9003
01051
11011
To specify your choice, follow the configuration procedure that begins on Page 5-1.
Enter your choice and press the Save key.
505 – Parity
Configuration Option 505 selects the printer parity. Parity must match that of the host.
noitpO eciohC gninaeM
505
0ytirapoN
1ytirapddO
2)tluafed(ytirapnevE
To specify your choice, follow the configuration procedure that begins on Page 5-1.
Enter your choice and press the Save key.
To Next Page
Loading...