701333-004 8-1
Chapter 8. Error Detection
and Recovery
The 1330 has encountered an error condition when one or both of the following occur:
• The alarm sounds.
• An error message appears in the display window.
When either of these conditions occurs, immediately press the Stop key to place the
1330 in Stop mode. If the Stop key will not work, write down the displayed error message
and call Customer Service.
Types of Errors
Three types of errors can occur on the 1330:
• Intervention required (IR) conditions
• General errors
• Unusual errors
Intervention Required Conditions
Intervention required conditions are errors that can be quickly corrected by the operator,
as outlined below:
egasseMyalpsiD gninaeM
TUOREPAP10smroffotuosiretnirpehT
MAJREPAP20demmajerasmrofretnirpehT
WEKSREPAP40dewekserasmrofretnirpehT
NEPOREVOC50neposirevocretnirpehT
NOBBIRON88retnirpehtnidellatsnisinobbiroN
See Appendix A of this manual for more complete information and recovery instructions
regarding these error conditions.
To Next Page
Loading...