701333-004 Index-1
410 – Full Form Feed Eject, 4-21
411 – Paper Eject Adjustment, 4-21
412 – Horizontal Offset, 4-22
413 – Horizontal Registration, 4-22
414 – Paper Jam Sensor Enable, 4-22
415 – Paper Out Sensor Enable, 4-22
416 – Paper Skew Sensor Enable, 4-23
418 – DOD Load Adjust, 4-23
419 – DID Load Adjust, 4-23
420 – Stop Mode Timeout (TO), 4-24
422 – Start Mode After Eject, 4-24
423 – Report Intervention, 4-25
501 – Printer Emulation Mode, 4-25
502 – Buffer Size, 4-26
503 – 2124 Escape Character, 4-26
504 – Early Print Complete, 4-26
601 – Interface, 4-27
602 – Idle Timeout, 4-27
701 – Print Configuration, 4-28
702 – Quick Reference, 4-31
703 – Set Factory Defaults, 4-31
704 – POR Custom Set, 4-31
705 – Save Custom Set, 4-32
706 – Recall Custom Set, 4-32
707 – Display Character Count, 4-32
708 – PA1, 4-33
709 – PA2, 4-33
710 – Buffer Reprint, 4-33
801 – Programmed Symbols, 4-33
804 – APA Print Direction, 4-34
901 – Serial Number, 4-34
902 – Device Specification Information, 4-34
3270 Configuration options
2124 Escape Character, 4-26
Alarm on Error, 4-18
APA Print Direction, 4-34
Attribute Selectable Highlighting, 4-16
Auto Eject, 4-21
Base Color, 4-16
Bold Print Enable, 4-10
Buffer Reprint, 4-33
Buffer Size, 4-26
Carriage Return (CR) at MPP + 1, 4-13
Characters per Inch, 4-6
Device Specification Information, 4-34
Display Character Count, 4-32
Display Language, 4-9
Dotted Zero, 4-12
Early Print Complete, 4-26
Index
Symbols
100 Page Format (3270), 4-5
100 Page Format (ASCII), 5-5
200 Font & Print Quality (3270), 4-8
200 Font & Print Quality (ASCII), 5-7
2124 Escape Character option (3270), 4-26
300 Compatibility (3270), 4-13
300 Compatibility (ASCII), 5-10
3270 Configuration option numbers
101 – Left Margin, 4-5
102 – Characters per Inch (CPI), 4-6
103 – Lines per Inch (LPI), 4-6
104 – Maximum Print Position (MPP), 4-7
105 – Form Length, 4-7
106 – Line Spacing, 4-7
107 – Force Set Media Size, 4-8
201 – Language, 4-8
202 – Display Language, 4-9
203 – Mono/Dual Case, 4-10
204 – Bold Print Enable, 4-10
205 – Two-Pass Print Direction, 4-10
206 – Print Quality, 4-11
207 – Host Fast Draft, 4-11
208 – Text Orientation, 4-11
209 – Dotted Zero, 4-12
210 – Graphics Density, 4-12
301 – Carriage Return (CR) at MPP + 1, 4-13
302 – New Line (NL) at MPP + 1, 4-13
303 – Null Suppression, 4-13
304 – Form Feed (FF), 4-14
305 – Form Feed with Auto New Line at Print
End, 4-14
306 – Midline Form Feed (FF), 4-14
307 – Form Feed (FF) Printed with a Space, 4-15
308 – Formatted Print, 4-15
309 – Bar Code Control, 4-15
310 – Base Color, 4-16
311 – Attribute Selectable Highlighting, 4-16
312 – Ignore SCS Commands, 4-17
401 – Operator Format, 4-17
402 – Key Alarm, 4-18
403 – Alarm on Error, 4-18
404 – Print Head Style, 4-18
405 – Print Head Column Spacing, 4-19
406 – Ribbon Type Override, 4-19
407 – Ribbon Track Select Adjustment, 4-20
408 – Module Type Override, 4-20
409 – Auto Eject, 4-21
To Next Page
Loading...