MTX 1330-X02 - Figure 2-10. Forms Specifications - Physical Requirements

2-12 701333-004
Preparing to Operate the 1330
suounitnoCDODDID
eludoMsmroFnoitpOnoitpO
epyTeludoMABB
smroFfoepyTsuounitnoCsuounitnoCelgniS
htgneL
mumixaMni0.41ni0.41ni0.41
mc6.53mc6.53mc6.53
muminiMni0.3ni0.3ni5.7
mc6.7mc6.7mc0.91
htdiW
mumixaMni0.51ni0.51ni0.51
mc1.83mc1.83mc1.83
muminiMni0.3ni0.3ni0.3
mc6.7mc6.7mc6.7
ssenkcihTsmroF
traPelgniS
mumixaMni600.0ni600.0ni600.0
mm51.0mm51.0mm51.0
muminiMni300.0ni300.0ni300.0
mm80.0mm80.0mm80.0
trapitluM
elbawollAmumixaMni520.0ni520.0ni520.0
mm46.0mm46.0mm46.0
dednemmoceRmumixaMni810.0ni810.0ni810.0
mm64.0mm64.0mm64.0
trapitluMniteehShcaE
mumixaMni600.0ni600.0ni600.0
mm51.0mm51.0mm51.0
muminiMni200.0ni200.0ni200.0
mm50.0mm50.0mm50.0
straPelpitluM
*elbawollAmumixaM666
dednemmoceRmumixaM441
*thgieW
traPelgniS
**mumixaMbl04bl04bl04
muminiMbl51bl51bl51
trapitluMniteehShcaE
**mumixaMbl04bl04bl04
muminiMbl21bl21bl21
*Specifications are applicable in coordination with forms thickness specifications.
**Forms should be tested by the customer for acceptability.
Figure 2-10. Forms Specifications - Physical Requirements