MTX 1330-X02 - Page 182

701333-004 Index-5
Index
Setup key, 3-5
Start key, 3-3
Stop key, 3-3
Top of Form key, 3-4
Up Arrow key, 3-4
L
Language option (3270), 4-8
Language option (ASCII), 5-7
Left Margin option (3270), 4-5
Left Margin option (ASCII), 5-5
Line Feed Definition option (ASCII), 5-11
Line Space key, 3-4
Line Spacing option (3270), 4-7
Line Spacing option (ASCII), 5-7
Lines per Inch option (3270), 4-6
Lines per Inch option (ASCII), 5-6
M
Maximum Print Position option (3270), 4-7
Maximum Print Position option (ASCII), 5-6
Midline Form Feed option (3270), 4-14
Modem Control option (ASCII), 5-24
Module Type Override option (3270), 4-20
Module Type Override option (ASCII), 5-17
Mono/Dual Case option (3270), 4-10
Mono/Dual Case option (ASCII), 5-9
N
New Line (NL) at MPP + 1 option (3270), 4-13
Nonshifting Ribbon, 2-7
Null Suppression option (3270), 4-13
O
Operator Control Panel, 3-1
Operator Format option (3270), 4-17
Operator Panel Adjust option (ASCII), 5-21
Option key, 3-5
P
PA1 option (3270), 4-33
PA2 option (3270), 4-33
Paper Eject Adjustment option (3270), 4-21
Paper Eject Adjustment option (ASCII), 5-18
Paper Jam Sensor Enable option (3270), 4-22
Paper Jam Sensor Enable option (ASCII), 5-19
Paper Out Sensor Enable option (3270), 4-22
Paper Out Sensor Enable option (ASCII), 5-19
Paper Skew Sensor Enable option (3270), 4-23
Paper Skew Sensor Enable option (ASCII), 5-20
Parallel Cable, 2-10
Parity option (ASCII), 5-23
Part Numbers
Nonshifting ribbon, 2-4
print head, 7-2
Shifting ribbon, 2-4
POR Custom Set option (3270), 4-31
POR Custom Set option (ASCII), 5-30
Power Cable Requirements, 2-8
Print Buffer
Reprinting, 6-4
Print Configuration option (3270), 4-28
Print Configuration option (ASCII), 5-27
Print Head Column Spacing option (3270), 4-19
Print Head Column Spacing option (ASCII), 5-15
Print Head Style option (3270), 4-18
Print Head Style option (ASCII), 5-15
Print Quality option (3270), 4-11
Print Quality option (ASCII), 5-10
Print Registration, 7-5
Printer Emulation Mode option (3270), 4-25
Printer Emulation Mode option (ASCII), 5-22
Printing the Setup Line, 6-2
Programmed Symbols option (3270), 4-33
Programming commands
Proprinter Commands, B-27
TI-810 Commands, B-38
Q
Quick Reference option (3270), 4-31
Quick Reference option (ASCII), 5-30
R
Recall Custom Set option (3270), 4-32
Recall Custom Set option (ASCII), 5-31
Replacing the Print Head, 7-1
Report Intervention option (3270), 4-25
Report Intervention option (ASCII), 5-21
Reprinting the Print Buffer, 6-4
Reserved option (ASCII), 5-25
Ribbon Track Select Adjustment option (3270), 4-20
Ribbon Track Select Adjustment option (ASCII), 5-16
Ribbon Type Override option (3270), 4-19
Ribbon Type Override option (ASCII), 5-16
Ribbons
Installing a Nonshifting Ribbon, 2-7
Installing a Shifting Ribbon, 2-4
Ordering, 2-4
Replacement, 7-1
RS-422 Polarity option (ASCII), 5-25