7
8. Connect the Chime
8.1 Click reset button
Click RESET on the chime, and the chime indicator on
the left will flash red for 20 seconds, indicating that the
chime is in pairing mode.
8.2 Press your doorbell to pair up
Press the doorbell button to send a pairing signal,
and your chime will sound to react, together with its
blue LED flashing. Chime pairing succeeds.
NOTE: If your home is large and you need more than
one Dingdong, please buy it on Amazon or contact
Mubview team to get extra 2.
support@mubview.com
To Next Page
Loading...