1. Charge the Doorbell
Please charge your doorbell with a DC 5V 1A~2A
phone adapter and the provided charging cable.
The LED will glow blue once fully charged.
1
Three units of AA batteries is required to make your
indoor chime 100% wire-free. And you will be free to
place your chime in almost anywhere indoors.
*Please mind the electrodes when installing batteries!
You can also plug in the provided USB cable and
connect the chime to DC 5V 1A~2A phone adapter.
2.1 Power by three AA batteries
2.2 Power by DC 5V adapter
support@mubview.com
Start Charging:
Fully Charging:
2. Supply Power to the Chime
To Next Page
Loading...