EasyManua.ls Logo

Mueller DW-600 - Electrical Requirements

Mueller DW-600
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
appliance to rust.
• This dishwasher is an automatic appliance, do not add water manually when the
appliance is working. It will cause overflow and is dangerous.
• To reduce the risk of injury, immediately replace work power cords, loose plugs
and/or power outlets.
• Disconnect electrical power and water intake hose to the dishwasher before
cleaning and/or servicing.
• If your old appliance is not being used, we recommend that you store the unit out
of the reach of children and remove its door. This will reduce the risk of injury to
children.
• Hydrogen gas may be produced if the water heater has not been used in more
than two weeks. This could be explosive and can explode under certain circum-
stances. If this is the case, before using this appliance, turn on all the hot water
faucets and let the hot water run for a few minutes. This will let the trapped hydro-
gen escape. During this process do not turn on an electric appliance, smoke, light
a match or lighter, or use a flame to avoid serious injury, due to the highly flamma-
ble nature of hydrogen gas.
This appliance must be plugged into at least a 120 Volt 60 Hz outlet. This appli-
ance must be grounded. It is equipped with a 3-prong power cord with a grounding
plug. The plug must be plugged into an outlet that is properly installed and ground-
ed.
WARNING! Improper use of the grounded wire can result in the risk of electric
shock.
Consult a qualified electrician if necessary. Do not attempt to tamper or modify
the plug in any form.
ELECTRICAL REQUIREMENTS
GROUNDING INSTRUCTIONS
3
Wall outlet with a
3-prong receptacle
Power supply cord with
3-prong grounding plug
DO NOT, under any
circumstamces, cut,
remove or bypass the
grounding prong!

Related product manuals