32
www.multilaser.com.br
Brightness adjusting Drag the nib of the touch pen on
the screen leftward/rightward to
adjust the brightness.
Back Click to back to the video file
folder interface to select your
favorite films
Elapsed time This is to show the elapsed time
or the total time of the film
2. Refer to Figure 6-2 for the video folder
Figura 6-2
Close Click to close the current folder
Last Click to show last page
Next Click to show the next page
Chapter 7 System Setting
Click the “Setting” button to enter the “setting” menu; then,
you can implement relevant settings. The settings cover
“volume”, “backlight”, “data time”, “language” and “system
information” etc, as shown in Figure 7-1:
Figura 7-1
Backlight This is to adjust the back light brightness
Volume Click to adjust the loudspeaker’s volume
Switch on/off screen click sound
GPS Info Click to check the current satellite signal
Language This is to set the prompt language
Time and date This is to set the system time and date and
show the system time zone
Calibration Calibrate the touch screen
Navi Path Set the path of the map
FM Turn on/off the FM transimit function
System
information This allows you to reset the device to
factory defaults, and implement GPS reset
and touch screen calibration.
7.1 Volume Setting
The volume setting is shown as Figure 7-2:
1. Loudspeaker’s volume adjustment; 2. Setting of “Screen
Click Sound”. 3. FM transmission (details as “7.2 FM transmis-
sion setting” content).
Figura 7-3
To Next Page
Loading...