MD105 RIDE-ON TROWEL • OPERATION MANUAL — REV. #0 (03/29/24) — PAGE 5
CHECKLISTS
No. Description OK? Date
1 Read operation manual completely
2
Machine layout, location of
components, checking of engine
and hydraulic oil levels
3 Fuel system, refueling procedure
4 Operation of spray and lights
5
Operation of controls
(machine not running)
6
Safety controls,
safety stop switch operation
7 Emergency stop procedures
8
Startup of machine, pre-heat,
engine choke
9 Maintaining a hover
10 Maneuvering
11 Pitching
12 Matching blade pitch. Twin-Pitch™
13 Concrete nishing techniques
14 Shutdown of machine
15 Lifting of machine (lift loops)
16 Machine transport and storage
Daily Pre-Operation Checklist
1 Engine oil level
2 Hydraulic oil level
3 Radiator coolant level
4 Condition of blades
5 Blade pitch operation
6 Safety stop switch operation
7 Steering control operation
To Next Page
Loading...
