Need help?Do you have a question about the MULTISOFT DisplayPort and is the answer not in the manual?
General| Brand | MULTISOFT |
|---|---|
| Model | DisplayPort |
| Category | Media Converter |
| Language | English |
Details the components and functions of the Video Grabber's front panel, including SD Card, USB, and Reset.
Explains the connectors and ports located on the back of the Video Grabber, such as PWR, LAN, and Video I/O.
Instructs how to connect video source signal to the Video Input and display to Video Output ports using DisplayPort.
Details network connection requirements, including LAN ports, cable types, and network standards for optimal performance.
Explains how to connect the power supply units to the Video Grabber, covering primary and secondary power sources.
Describes the information provided on the Status screen of the Video Grabber's web interface.
Guides users through configuring the Video Grabber via its web interface, including login credentials and available settings.
Explains how to define the Video Grabber's output format, including selecting the output method and its implications.
Details how to set the output frame rate for the Video Grabber in frames per minute.
Describes the available output format options (BMP, PNG, JPEG2000, etc.) when using specific output methods.
Covers settings for encoded video parameters like CBR, VBR, and pixel tolerance for H.264/LOSSLESS.
Defines network settings for each LAN port, including IP address, Netmask, and NFS/SMB share configurations.
Explains the optional device description parameter used for identifying the device on status screens.
Details how to configure two NTP servers for accurate time synchronization of the Video Grabber.
Describes the functionality of device control buttons like Save, Update Time, Reboot, and Force Firmware Update.
To Next Page
