Need help?Do you have a question about the MULTISOFT DGR-1000 and is the answer not in the manual?
Details the front panel ports, connectors, and display of the Video Grabber.
Details the back panel ports, connectors, and interfaces of the Video Grabber.
Explains the information displayed on the OLED screen and its configuration options.
Provides an overview of the installation process and initial connection considerations.
Guides users on setting up the device for pass-through video signal capture.
Explains how to configure the device to emulate a monitor for specific use cases.
Lists the video resolutions that have been tested and verified for compatibility.
Details the steps for connecting the Video Grabber to a network via its LAN ports.
Describes how to connect the power supply and the dual power input design for redundancy.
Displays real-time operational parameters, device status, and network information.
Allows modification of IP addresses, video processing, and synchronization settings.
Provides video stream preview and adjustments, including monitor emulation.
Manages status reporting, WWW access, and SNMP security configurations.
Introduces SNMP for automating device actions and monitoring.
Explains SNMPv3 access, data organization, and OID structure.
Details configuration for read-only SNMP access for status monitoring.
Details configuration for read-write SNMP access for changing device parameters.
Lists read-only objects for product name, versions, serial number, and chip ID.
Lists objects providing current device status such as API version, uptime, and temperatures.
Lists objects for configuring device settings like output type, codecs, and network parameters.
General| Category | Media Converter |
|---|---|
| Model | DGR-1000 |
| Interface | Ethernet |
| Data Rate | 10/100Mbps |
| Humidity | 5% to 95% non-condensing |
| Storage Temperature | -20°C to 70°C |
To Next Page
