MULTISOFT DGR-1000 - Stageneral (Subsection 2)

Video Grabber DGR-1000 User Manual - v. 1.4 (FW 1.9)
58
5.4.2. staGeneral (subsection 2)
In the following table only OBJECTNUMBER part of the identifier (OID) is listed.
OBJECTNUMBER
Name
Access
Type
Description
1
uptime
read-only
Counter
Number of seconds since the
Video Grabber was started
2
uptimeTotal
read-only
Counter
Total number of seconds since
the Video Grabber was first
started
3
healthTempCpu
read-only
Integer
CPU temperature in °C
4
healthTempPcb
read-only
Integer
PCB temperature in °C
5
healthPower1
read-only
Integer
Power 1 status:
0 – down
1 – up
6
healthPower2
read-only
Integer
Power 2 status:
0 – down
1 – up
7
lastResetReason
read-only
string
Reason of the last reset of the
device:
user – device was restarted by
the user (e.g. using web-
interface)
power – device was restarted
due to the disconnection of
power
8
healthDpPower
read-only
Integer
Status of power on PIN 20 of
DisplayPort connectors:
0 – down
(not enough power – less than
500mA)
1 – up
(enough power – at least
500mA)
Example:
The OID for uptime is 1.3.6.1.4.1.46236.1.2.2.1.0 as the OID is constructed in the
following way:
VIDEO GRABBER
.
SECTION
.
SUBSECTION
.
OBJECTNUMBER
.
1.3.6.1.4.1.46236.1
.
2
.
2
.
1
.
0