MULTISOFT DGR-1000 - SNMP Access

Video Grabber DGR-1000 User Manual - v. 1.4 (FW 1.9)
51
4.4.3. SNMP access
In the SNMP access section user can change the access and security details of SNMP. There are two
users available:
1. ro_user – read-only – used for getting the status information
2. rw_user – read-write – used to configure the Video Grabber
1
2
3
4
5
6
7
8
Figure 45: SNMP access section on the Administration page
RO
RW
Parameter
Description
1
5
Authentication
Protocol
Protocol used for authentication.
Possible options:
- MD5 – Message-Digest algorithm 5
- SHA – Secure Hash Algorithm
2
6
Privacy
Protocol
Protocol used for encryption of transmitted data.
Possible options:
- DES – Data Encryption Standard
- AES – Advanced Encryption Standard
3
7
Authentication
Password
Authentication password
Allowed values:
String of at least 8 characters
4
8
Privacy
Password
Privacy password
Allowed values:
String of at least 8 characters
Table 31: Description of SNMP access related parameters