MULTISOFT VGR-1000 - User Manual

VIDEO GRABBER
VGR-1000
User Manual
v. 1.19 (FW 1.29)

Summary

1. General Description

2. Device Overview

2.1. Front Panel

Details the components and indicators on the front of the device.

2.2. Back Panel

Describes the connectors and ports located on the rear of the device.

2.3. OLED Screen

3. Device Installation

3.1. Introduction

Provides an overview of the device installation process.

3.2. Connecting Video Signal Cables

3.3. Network Connection

3.4. Power Supply Unit

4. Video Grabber Web Interface

4.1. Status Page

Overview of the Video Grabber's status monitoring interface.

4.2. Configuration Page

4.3. Preview Page

5. SNMP

5.1. Introduction

Introduces the Simple Network Management Protocol for device control.

5.2. Accessing the Video Grabber via SNMP

Guides on how to access device information and control using SNMP.

5.3. Information (section 1)

5.4. Status (section 2)

5.5. Configuration (section 3)

6. Firmware Upgrade

6.1. Introduction

Introduces the process and mediums for firmware upgrades.

6.2. microSD card; USB pendrive

Explains firmware update procedure using removable media.

6.3. TFTP Server

7. Factory Reset

Appendix A: Modelines

Appendix B: Status UDP frame structure

Appendix C: Broadcast UDP packet structure

MULTISOFT VGR-1000 Specifications

General

Brand	MULTISOFT
Model	VGR-1000
Category	Media Converter
Language	English