MULTISOFT VGR-1000 - Stantp (Subsection 4)

Video Grabber User Manual - v. 1.19 (FW 1.29)
49
staNtp (subsection 4)
In the following table only OBJECTNUMBER part of the identifier (OID) is listed.
OBJECTNUMBER
Name
Access
Type
Description
1
ntpPeerTable
-
Table
NTP peers table
While it is possible to read objects organized in tables using snmpget command it is rather impractical
to do so as each item from within the table has to be read individually. There are dedicated tools used
for SNMP table processing. Those tools require a MIB file containing information on table parsing.