MULTISOFT VGR-1000 - 5.4. Status (section 2)

Video Grabber User Manual - v. 1.19 (FW 1.29)
45
5.4. Status (section 2)
Status section contains objects that provide the information related to the current state of the Video
Grabber device. Due to the amount of objects available, they have been grouped into four subsections:
1. staVersion – contains object with information related to the version of the status section,
2. staGeneral – contains objects with general information related to the state of the device,
3. staVideo – contains objects with information related to the captured video signal,
4. staNtp – contains objects with information related to time synchronization (NTP),
5. staRtsp – contains objects with information related to RTSP stream.
5.4.1. staVersion (subsection 1)
In the following table only OBJECTNUMBER part of the identifier (OID) is listed.
OBJECTNUMBER
Name
Access
Type
Description
1
staApiVersion
read-only
Integer
Version of SNMP
implementation
2
staApiRevision
read-only
String
Implemented revision marker
(e.g. 201607130000Z)
Example:
The OID for staApiVersion is 1.3.6.1.4.1.46236.1.2.1.1.0 as the OID is constructed in the
following way:
VIDEO GRABBER
.
SECTION
.
SUBSECTION
.
OBJECTNUMBER
.
1.3.6.1.4.1.46236.1
.
2
.
1
.
1
.
0