Video Grabber User Manual - v. 1.19 (FW 1.29)
13. broadcastdelay – broadcast delay, set to compensate the network delays when set as
broadcast client. By default it is not used by Video Grabber.
14. authdelay – since authentication involves extra computing, authentication delay setting is
used to compensate it. Currently calculated automatically (if needed).
4.1.4. Analog resolution table
Analog resolution table lists currently configured modelines that can be used by Video Grabber to
interpret captured analogue video signals. It is possible to extend that list by adding additional
modelines (See 4.3, p. 39).
To Next Page
Loading...
