Video Grabber DGR-1000 User Manual - v. 1.4 (FW 1.9)
7. Factory reset
Video Grabber can be reset to the factory default settings. The procedure is as follows:
1. Prepare microSD card with FAT32 filesystem
2. In the root directory of the microSD card create an empty file: factory_reset.bin
3. Insert the card into the microSD slot
4. Video Grabber should automatically reset its settings to factory defaults.
5. When done Video Grabber will show the following message on the OLED screen:
FACTORY RESET
Remove the card!
6. Remove microSD card from the slot. At this point factory default settings should be restored
and Video Grabber will reboot.
To Next Page
Loading...
