3.4. Power supply unit
Video Grabber has two power slots, but needs only one connected to work. It’s best to connect both
slots using two different power sources at all times to ensure redundancy.
One 12 volt, 2 ampere power supply (provided with device) should be connected to Power 0, and
second one to Power 1. If one power supply fails, another one takes its place.
12 Watts are required for Video Grabber to work.
Connecting Video Grabber to power source:
Step 1. Plug power supply unit to Video Grabber, make sure *click* is heard.
Step 2. Tighten the screw on the plug to secure power supply unit from unplugging.
Step 3. Power supply unit can now be connected to power source.
To Next Page
Loading...
