Page 6 | ModTable | vs 5.0
3.1 IMPORTANT! READ ALL BEFORE ASSEMBLING
3.2 Verify Package Contents
Gently remove contents from packaging.
Check the contents for transit damage.
Ensure all parts are in the box.
In case of any damage or missing/incorrect parts, contact customer service at
602.773.6911 or at customerservice@multitable.com
Do not attempt to assemble the ModTable Base if there is any damage or are any
missing/incorrect parts.
3.3 IMPORTANT! Assembly Information
Only assemble the ModTable Base with the tools supplied. (Allen wrenches)
You will need a screw driver to attach the table top to the Base.
The legs MUST be at the lowest position at all times during assembly.
Before assembly, read safety information in Section 2.0.
1
# Description Qty
03 Foot 2
09 Adjustable feet 4
In Photo 1:
Screw adjustable
feet into foot caps.
3.4.1 Attaching the Adjustable Feet
Important!
All bolts MUST BE FULLY TIGHTENED. After you initially tightening each bolt, you will
need to go back and double check the bolts to ensure the bolts are fully tightened.
3.4 Assembly of the ModTable
In Photo 1a:
Foot assembly
complete.
1a
To Next Page
Loading...