Multitech Conduit AP MTCAP-L4E1-868-002A - Chapter 1 - Product Overview; Overview; Product Build Options; Package Contents

PRODUCT OVERVIEW
Conduit
®
AP MTCAP2-L4E1-868-002 and MTCAP2-868-002 User Guide 5
Chapter 1 – Product Overview
Overview
Conduit AP (MTCAP2) connects thousands of IoT assets to the cloud using the LoRaWAN
®
protocol. It expands LoRa
network coverage to difficult to reach areas and is capable of packet forwarding user data between LoRa end
points and a centrally located network server on the cloud, in a data center, or a public network.
Note: Check for an updated version of this document at https://www.multitech.com/brands/multiconnect-
conduit-ap/.
Product Build Options
Product Description
MTCAP-L4E1-868-002A LTE Cat 4 mPower Programmable Access Point with optional PoE power,
internal LoRa antenna and EU/UK Accessory Kit (Europe)
MTCAP-L4E1-868-002L LTE Cat 4 mLinux Programmable Access Point with optional PoE power,
internal LoRa antenna and EU/UK Accessory Kit (Europe)
MTCAP-868-002A mPower Programmable Access Point with optional PoE power, internal
LoRa antenna and EU/UK Accessory Kit (Europe)
MTCAP-868-002L mLinux Programmable Access Point with optional PoE power, internal
LoRa antenna and EU/UK Accessory Kit (Europe)
Note: The complete product code may end in .Rx, where R is revision and x is the revision number. For
example, MTCAP-L4E1-868-002L-R1.
Package Contents
Your device ships with the following:
1 – MTCAP2
1 – Mounting Bracket
1 – RJ45 Ethernet cable
1 – Quick Start
Note: You will also need either a 5 Volt, 2.5 Amp power supply or a PoE injector.