Multitech MMCModem GPRS (MTMMC-G) - Default Configuration Z; Save Configuration &W

Chapter 12 – V.24 and V.25 Commands
Multi-Tech Systems, Inc. Wireless GSM/GPRS AT Commands (Document Number S000293I) 103
DCE Response Format V
Description: This command determines the DCE response format, with or without header characters <CR><LF>.
Result codes are provided as numeric or verbose.
Values:
<n>=0
<n>=1
Information
responses
<text><CR><LF> <CR><LF>
<text><CR><LF>
Result codes
<numeric code><CR> <CR><LF>
<verbose code><CR><LF>
Syntax: Command syntax: ATV<n>
Command Possible responses
ATV0
Note: DCE transmits limited headers and trailers and
numeric result codes
0
Note: Command is valid (0 means OK)
ATV1
Note: DCE transmits full headers and trailers and
verbose response text
OK
Note: Command valid
Default Configuration Z
Description: This command restores the configuration profile. Any call is released.
Values: No parameters
Syntax: Command syntax: ATZ
Command Possible responses
ATZ OK
Note: Command valid
Save Configuration &W
Description: This command writes the active configuration to a non-volatile memory (EEPROM). For description of
the stored parameters, refer to Appendix A.
Values: No parameters
Syntax: Command syntax: AT&W
Command Possible responses
AT&W
Note: Writes current configuration to EEPROM
OK
Note: Command valid