Multitech MMCModem GPRS (MTMMC-G) - Read Language Preference +WLPR; Write Language Preference +WLPW

Chapter 13 – Specific AT Commands
Multi-Tech Systems, Inc. Wireless GSM/GPRS AT Commands (Document Number S000293I) 113
Read Language Preference +WLPR
Description: Read a Language Preference value of EF-LP. The first indices should have the highest priority.
Values: <index> Offset in the available languages range (SIM dependent)
<value> Values for language. See Recommendation 3GPP TS 23.038. Language example:
<value> Language
0 German
1 English
2 Italian
3 French
4 Spanish
5 Dutch
6 Swedish
7 Danish
8 Portuguese
9 Finnish
10 Norwegian
11 Greek
12 Turkish
13 Hungarian
14 Polish
32 Czech
33 Hebrew
34 Arabic
35 Russian
36 Icelandic
Syntax: Command syntax: AT+WLPR= <index >
Response syntax: +WLPR: <value>
Command Possible responses
AT+WLPR?
Note: Read command
+WLPR: 4
OK
Note: Four language preferences are available in EF-LP
AT+WLPR=1
Note: Read first EF-LP index value
+WLPR: 5
OK
Note: Language preference is 5
Write Language Preference +WLPW
Description: Write a Language Preference value in EF-LP.
Values: <index> Offset in the available languages range (SIM dependent)
<value> See <values> examples above (Read Language Preference +WLPR)
Syntax: Command syntax: AT+WLPW=<index >,<value>
Response syntax: OK or +CME ERROR: <err>
Command Possible responses
AT+WLPW=1,5
Note: Write Lang Pref equal to 5 in EF-LP with index 1
OK
Note: EF-LP correctly updated