Multitech MMCModem GPRS (MTMMC-G) - Page 110

Chapter 13 – Specific AT Commands
Multi-Tech Systems, Inc. Wireless GSM/GPRS AT Commands (Document Number S000293I) 110
14 The rack has been detected as Open.
15 The modem received a NITZ information message from the network.
16 SMS and SMS CB services are ready.
For Event 10:
<phonebook>: SIM phonebook
"SM”
“FD”
“ON”
“SN”
“EN”
<status>:
0 Not Reloaded from SIM (no change since last init or SIM remove)
1 Reloaded from SIM to internal memory (at least one entry has changed)
For Event 11:
<checksum>: 128-bit “fingerprint” of the phonebook.
Note: If the service of the phonebook is not loaded or not present, the checksum is not displayed and
two commas without checksum are displayed (,,).
For Event 15:
<Full name>: String. Updated long name for current network.
<Short name>: String. updated short name for current network.
<Local time zone>: Signed integer. Time Zone indicates the difference, expressed in quarters of an
hour, between the local time and GMT.
<Universal time and local time zone>: String, Universal Time and Time Zone, in format
"yy/MM/dd,hh:mm:ss±zzz" (Year/Month/Day,Hour:Min:Seconds± Time Zone).
The Time Zone indicates the difference, expressed in quarters of an hour,
between the local time and GMT.
<LSA Identity>: Hexa string. LSA identity of the current cell in hexa format (3 bytes).
<Daylight Saving Time>: Integer (0-2). When the LTZ is compensated for DST (Daylight Saving Time
or summertime), the serving PLMN shall provide a DST parameter to indicate it.
The adjustment for DST can be + 1h or +2h.
Note: For the NITZ indication, all the fields indicated here are optional. That is why there is an index
related to each of the following:
• 1: Full name for network
• 2: Short name for network
• 3: Local time zone
• 4: Universal time and local time zone
• 5: LSA identity
• 6: Network Daylight Saving Time
Syntax: Command syntax: AT+WIND= <IndLevel >
Command Possible Responses
AT+WIND? +WIND: 0
OK
AT+WIND=255 OK
Note: The SIM has been removed. +WIND: 0
Note :The SIM presence pin has been detected as “SIM
removed”
Note: The SIM has been inserted. +WIND: 1
Note :The SIM presence pin has been detected as “SIM
inserted”
Note: The network service is available
for an emergency call
+WIND: 7
Note: The initialization has been
completed
+WIND: 4
Note: The modem received a NITZ
information message
+WIND: 15,1,"Cingular Extended",2,"Cingular",3,"+08",
4,"03/14/27,16:59:48+08",5,"123456",6,"2"