Multitech MTR-LAT1-B07 - Page 61

DEFINING TUNNELS
MultiConnect
®
rCell 100 MTR-LTE User Guide 61
10. The system displays your recently-added Remote Network Route with the client subnet (remote network
route + mask).
Note: Push Routes are not required with Static Key as Authorization Mode.
11. Click Next.
12. The system displays the Configuration Preview window (read-only).
13. Click Finish.
14. Click Save and Restart to save your changes.
To add an OpenVPN Client using Static Key:
1. Go to Tunnels > OpenVPN Tunnels > OpenVPN Tunnel Configuration.
2. Click Add Tunnel.
3. Enter the Name.
4. Select the Type as CLIENT from the drop-down.
5. You can also enter an optional Description.
6. Click Next.
7. Enter the following fields (using STATIC KEY as Authorization Mode):
a. Interface Type as TUN from the drop-down.
b. Authorization Mode as STATIC KEY from the drop-down.
c. Protocol as UDP.
d. Local Address as DEFAULT.
e. Remote Host.
f. Remote Address as DEFAULT.
g. Remote Port number.
h. Hash Algorithm as DEFAULT from drop-down.
i. LZO Compression as ADAPTIVE from the drop-down.
j. Select the Encryption Cipher as DEFAULT from drop-down.
k. Select the Hash Algorithm as DEFAULT from drop-down.
l. Enter the Static Key PEM (required). Both server and client must use the same static key. See
example below:
-----BEGIN OpenVPN Static key V1-----
3f4c9113b2ec15a421cfe21a5af015bb967059021c1fd6f66ecfd00533d967237875215e20e80a2d59efd
79148d6acdea9358dcafe0efdbb54003ff376c71432dd9d16f55e7d8917a32bfe07d61591b7bbb43c7ba
d214482b8547ec9dca8910f514d9f4270ccaeff1a79852ae27c1c307c9dc3c836d1c380bece3c70fd2104
e1968ed29b6c3388719226f959f69f9be43688ed27bc3a4dbc83f640370524b47bb871816af79586d07
08781fad384480d0609b11c31d27baa6e902d29277a474e3e2785a8410d595c0f9c75312375b4bd098
76e1a47a598e114749a09c35f098e9123015c2795c702e4a346a8bccd00305c7cb30beef66ad33f43dac
c2e662128
-----END OpenVPN Static key V1-----.
8. Click Next.
9. Remote Network Routes create a route from the server network to the client network. This allows the
client to get access to the server's network. In the OpenVPN Tunnel dialog box, under Remote Network
Routes: