Chapter 3 - AT Commands, S-Registers and Result Codes
67
Terse Verbose Description
162 * CARRIER 56000
56000 bps Data Carrier
Detected
165 * CONNECT 32000
Connected at 32000 bps
166 * CONNECT 34000
Connected at 34000 bps
167 * CONNECT 33600
Connected at 33600 bps
168 * CONNECT 38000
Connected at 38000 bps
169 * CONNECT 40000
Connected at 40000 bps
170 * CONNECT 42000
Connected at 42000 bps
171 * CONNECT 44000
Connected at 44000 bps
172 * CONNECT 46000
Connected at 46000 bps
173 * CONNECT 48000
Connected at 48000 bps
174 * CONNECT 50000
Connected at 50000 bps
175 * CONNECT 52000
Connected at 52000 bps
176 * CONNECT 54000
Connected at 54000 bps
177 * CONNECT 56000
Connected at 56000 bps
20 * CONNECT 230400
Connected at 230400 bps
+F4 * +FCERROR
V.21 signal received/High Speed
FAX Expected (V.27, V.29, V.33
or V.17).
*These Extended Result Codes are displayed when your modem is set-up to
do so with an X1, X2, X3, or X4 command.
To Next Page
Loading...
