Multitech MultiModem MT5600ZDX - Modem Ce Mark Emc and Safety Compliance

MT5600ZDX Owner's Manual
92
Compliance with BS6328 Part 1
a. The modem is not suitable for use on circuits with British
Telecommunications signaling at a normal frequency of 2280 Hz.
b. The modem does not require signaling or otherwise employ the
frequency range dc to 200 Hz.
c. The modem may be connected to a point to point two-wire or four-
wire Private Circuit.
d. The modem does not require dc from the Private Circuit for
correct operation. The modem may be damaged if connected, in a
private circuit mode, to a circuit supplying dc current (the
maximum permissible direct current is zero amps).
Modem CE Mark EMC and Safety Compliance
The CE mark is affixed to the enclosed Multi-Tech product to confirm
compliance with the following European Community Directives:
Council Directive 89/336/EEC of 3 May 1989 on the approximation of
laws of Member States relating to electromagnetic compatibility;
and
Council Directive 73/23/EEC of 19 February 1973 on the
harmonization of the laws of Member States relating to electrical
equipment designed for use within certain voltage limits;
both amended by
Council Directive 93/68/EEC of 22 July 1993 on the harmonization of
CE marking requirements.