© Munters AB, 2020 Trio 15
3.12 Enabling SMS Messages
•
Sending SMS message requires a Communicator 2.0 having an internal modem
(supplied by Munters if ordered). This modem will support your cellular
infrastructure and region (4G US, 4G ROW, 3G)
•
Insert a 3G or 4G standard SIM card as indicated:
Figure 13: SIM Port
3.13
Testing the Battery
CAUTION Munters highly recommends testing the battery immediately after
completing the installation!
1. Ensure that the battery is charged (Green LED should be on continuously). If the
LED blinks, wait.
2. Disconnect the AC power. Power LED turn red.
3. You should receive an alarm according to the contact list settings.
4. After receiving the alarm message, reapply power.
To Next Page
Loading...