Munters Communicator 2.0 - 3.4 Mounting the Communicator 2.0

© Munters AB, 2020 Trio 9
Table 2: Component Description
Number Description Notes
1 Power Supply
2 Battery (refer to Appendix A: Changing the Battery,
page 33)
3 LED Board
4 Line Modem Card This card is under
the LED board
5 Not used
6 Board
7 Cell Modem
8 SSD Card
9
Main CPU
3.4 Mounting the Communicator 2.0
Figure 3: Dimensions (mm)
• Mount the unit using the four supplied screws.