Munters Communicator 2.0 - 5.4 Testing Communication Functions; 5.5 Additional Functions; 5.5.1 Software Upgrade

© Munters AB, 2020 Trio 28
• Canceling a Response for Every Sent Text Message
!AOFF > 'Send' to the Communicator cell phone number
! = Start of message
A = Acknowledgement
5.4 Testing the Communicator 2.0
• To test a communication function, on the Alarm Settings screen click:
o
Phone Line Test
o
Cellular Modem Test
o
Create Test Alarm
o
Send Email
o
Send Push Notifications
5.5 Additional Functions
• Software Upgrade
• Battery Status
• Controllers Connectivity
5.5.1 S
OFTWARE
U
PGRADE
You can upgrade certain software programs from the Web application.
• Trio software
• Web application
• Communicator 2.0 software
NOTE: The Communicator 2.0 can only be updated locally; it cannot be updated
remotely. The System Update button does not appear in remote connections.
NOTE: You cannot upgrade product software! Upgrade your product software using the
procedures given in the product manuals.
NOTE: If you are using a disk on key start here. If you are updating your Communicator
2.0 via the web, go to step 2.
1. Request the software upgrade from your dealer. You will be sent (via email, web
transfer, etc.) a UPD file.
a. Place the file on a disk on key/flash drive.
b. Place the disk on key/flash drive into the Communicator 2.0's USB port.
2. On the main screen, click the settings icon . From the drop down list select
Software Update. The following screen appears: