EasyManua.ls Logo

Munters Communicator 2.0 - Receiving the Message; Responding to the Alarm Message

Munters Communicator 2.0
41 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
© Munters AB, 2020 Trio 26
Receiving the Message
Responding to the Alarm Message
5.3.1.1
Receiving the Message
The following illustrates the sequence of ALARM messages:
"Good <Morning / Afternoon / Evening> farm <#> active alarm.
Please, press 1 to listen."
"House <#> has <#> alarm message<s>."
Alarm messages for the first house are played and then the following options are
available:
Acknowledge
Replay house
message
Play next house
message
End call
Enter password (if acknowledging for the first time this call) and press
.
"Please wait… Reset for house <#> successful. <Next Message / Goodbye>."
When you hear "Please wait" press
to access the ALARM OPTIONS MENU.
5.3.1.2
Responding to the Alarm Message
System reports alarm and then offers the following options:
Disable alarms
Return to house
messages
Replay alarm
message
End call
NOTE: Disabling alarms disables them until 12:00 PM the following day.
"Disable <confirmed / failed>!" message is repeated and returns to House Alarm
Messages
NOTE: If at any time an incorrect key is pressed or if nothing is pressed, the system
repeats itself three times and then ends the call.
1
9
0
1
0

Other manuals for Munters Communicator 2.0