© Munters AB, 2020 Trio 25
5.2.5
D
ISABLE
A
LARMS
To disable an alarm:
1. Click the Disable Alarms tab.
2. Click the corresponding radio box.
NOTE All alarms are listed. However, there are alarms which cannot be disabled due to
their importance.
5.2.6
C
LEAR
A
LARMS
To clear the alarm history, under Factory Defaults, click Clear.
5.3
Responding to Alarms
Upon receiving an alarm message (voice or SMS), you can respond to the message. The
following sections detail how to respond to these messages.
•
Responding to an Audio Message
•
Responding to a Text Message
5.3.1
R
ESPONDING TO AN
A
UDIO
M
ESSAGE
Communicator 2.0 sends voice messages to the designated people on the contact list. This
section details the procedure to follow when an audio alarm is received.
NOTE: This service is provided by the Communicator 2.0 ONLY if the contact is properly
defined with contacts and the "VOICE" service selected per contact.
Communicator only broadcasts its alarm message AFTER someone speaks into the phone.
Any word or sound is sufficient.
To Next Page
Loading...