Munters Communicator 2.0 - Page 22

© Munters AB, 2020 Trio 22
• Language: Select the language from the drop down list.
• Availability:
o
Select the days on which messages are sent to the contact.
o
Define the hours in which messages are sent to the contact.
• Permission:
o
Allow User to Reset Alarm: Select On/Off.
o
Pin code for incoming calls (optional): The Pin code provides a second level of
security to the alarm system. The first level of security is the contact list; only
these numbers can interact with the Communicator 2.0. If a pin code is
added, only someone having the code can reset the alarms, even when
calling from an authorized phone number.
4. Click Save .
5. Other functions
o
Active/Disabled: If you want to stop sending messages to a contact but do
not want to delete the contact, select Disabled.
o
Delete a contact: Click
NOTE: Click on an existing contact name to edit the person's settings