EasyManua.ls Logo

Munters MX2 40 - Service and Maintenance; Service Safety and General Maintenance

Munters MX2 40
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6 Serviceandmaintenance
6.1 Safety
WARNING!
Installation, adjustments,maintenanceandrepairsmustonlybe carriedout byqualified personnelwhoare
awareoftherisks involved when workingwithequipment operatingwithhigh electricalvoltage andhighmachine
temperatures.
WARNING!
Themainspowersupplyispermanentlyconnected tothe main power switch oftheunit. Riskof electric shock.
WARNING!
Thedehumidifiercan restartautomaticallyaftera power cut. Alwaysswitchoff andlockthemainpowerswitch
beforecarryingoutanyservicework.
6.2 Regularserviceandmaintenance
Munters dehumidi
ers are designed to r un reliably in continuous operation for long periods. Regular
service and mainte
nance is required to ensure that the dehumidier is operating as efcient and economical
as possible.
Service and maintenance interval lengths are primarily determ ined by operating conditions and the
environment in which the unit is installed. For example, if the process air contains a lot of dust, preve ntative
maintenance should be carried out at shor ter intervals. The same also applies if the dehumidier works
intensively.
The service levels for a standard service and maintenance progr amme are described in s e ction
6.3, Service options.
Thedehumidier's control system is equipped with a service indicator. During installation and
commissioning, an estimate should be made of a suitable number of operating hours until the next ser vice,
or the date for the next service. This value is prog rammed by Munters personnel at initial start -up of the unit.
190TEN–108 9–G1412
Serviceandmaintenance
37

Table of Contents

Related product manuals