Muratec MFX-C3680 Series
Fax Features
21
26. Touch Line 2 as the forwarding line.
27. Touch Forward Dest. and then touch Select From Address Book and select
the SMB Folder destination (destination must be pre-registered).
28. Touch OK 2x to return to the Main Menu.
29. The selected destination will appear in the Forward Dest. Field for Line 2.
30. Touch Close 5x to return to the Main Menu.
These settings will forward all incoming faxes received on Line 1 to an Email
Address and only print the transmission if the forwarding fails and all incoming
faxes received on Line 2 will be forwarded to the SMB Folder and printed.
Please make sure your destinations are already registered in a One-Touch
key otherwise you will not be able to access the destinations when you
touch Select from Address Book.