bizhub C754e Series/C554e Series/C364e Series
Fax Job Shops
24
26. Select line settings for Line 2.
27. Touch Select Line.
28. Touch TX & RX to enable sending and receiving to this line.
29. Touch OK.
30. Touch Close 4x to return to the Main Menu.
These settings will forward all incoming faxes received on Line 1 to an FTP
Address and only print the transmission if the forwarding fails and all incoming
faxes received on Line 2 will be printed. In this configuration, users will be able
to transmit faxes using Line or Line 2.
You can reverse the settings and instruct the MFP to print incoming faxes
received on Line 1 and forward incoming faxes to the selected destination
on Line 2.
To Next Page
Loading...
Need help?
General
