Instruction manual – MU-C/S 21
Mounted equipment
• Before fitting or removing the mulcher ensure that the three point linkage is secured to prevent
unintentional lifting or lowering of the linkage.
• When connecting to a three-point mount all three points must match or be adjusted until they
match.
• Check carefully after fitting the mulcher that the tractor’s lower linkage is properly
secured.
• Points subject to crushing and shearing in the area of the three-point linkage are capable of
causing injury.
• Do not position yourself between the tractor and the machine when actuating the external
control for the three-point linkage!
• When the machine is in the transporting position always ensure that the tractor three-point
linkage has sufficient side-locking!
• When travelling on the road with the machine raised ensure that the operating lever is locked to
prevent it being lowered unintentionally!
• If there is a blockage never try to remove mulch or debris before the mulcher has been shut
down and disengaged, the tractor turned off, the key removed and all turning parts have come to
a complete standstill.
Hydraulic system
• The hydraulic system is under high pressure!
• When connecting hydraulic cylinders and engines ensure that the hydraulic pipes have the
proper connections!
• When connecting the hydraulic pipes to the tractor hydraulics, ensure that there is no pressure
at either the tractor- or the machine-end.
• If there are hydraulic connections between the tractor and the machine, coupling sleeves and
plugs should be labelled to rule out faulty operation! You risk causing an accident if connections
and functions are reversed (e.g. raising instead of lowering)!
• Check hydraulic pipe connections regularly and change them if they become damaged or worn!
The replacement hoses must match the machine manufacturer's specifications!
• Use suitable aids when looking for leakages so as to avoid injury!
• Fluids, such as hydraulic oil, ejected at high pressure can penetrate the skin and cause serious
injury! If you are injured seek medical help immediately
! (Risk of infection!)
• Before working on the hydraulics, disengage any equipment, depressurise the system and turn
off the engine!
• Don’t hang out safety chains until they have been released. (Cylinder must be full of oil).
To Next Page
Loading...